San Diego Water Hardness: 14 gpg, Softener Settings and Salt

San Diego water hardness averaged 237 to 243 ppm (13.8 to 14.2 grains per gallon) at the city’s three treatment plants in 2025, according to the City of San Diego’s latest water quality report. That’s very hard on the USGS scale. Individual samples ranged from 200 to 285 ppm, so if you run a softener, set it to about 17 gpg to cover the hardest water the city delivered.

On this page
  1. San Diego water hardness by treatment plant
  2. Why the city’s website says 16 gpg
  3. Where San Diego’s water comes from
  4. San Diego water hardness in other units
  5. What 14 gpg means in a San Diego home
  6. Softener size and salt use in San Diego
  7. Sodium, chloramine and your softener
  8. Other San Diego County utilities
  9. Frequently asked questions

San Diego water hardness by treatment plant

The City of San Diego treats its water at three plants: Alvarado, Miramar and Otay. A small share arrives already treated from regional plants. The report gives hardness for each source separately, and the city’s system is interconnected, so your tap can draw from more than one plant depending on where you live.

Total hardness of City of San Diego water, 2025
SourceAverage (ppm)Range (ppm)Average (gpg)Range (gpg)
Alvarado plant237203–27013.811.9–15.8
Miramar plant242200–28514.111.7–16.6
Otay plant243201–27114.211.7–15.8
Purchased treated water14554.4–2328.53.2–13.6

Source: City of San Diego, 2025 Annual Drinking Water Quality Report, “Other parameters that may be of interest” (ppm as calcium carbonate; gpg as published by the city). Purchased treated water is under 10% of the city’s supply.

The three plants are remarkably close to one another, all within 6 ppm on average. In practice that means one setting works for nearly every home on city water. The purchased water is softer, but it’s a small and changing share of the blend, so it’s not something to size a softener on.

Why the city’s website says 16 gpg

If you’ve seen a higher figure, it probably came from the city’s water quality web page. That page says San Diego water typically averages about 16 grains per gallon, or 276 ppm, and ranges from 272 to 284 ppm depending on demand and where you live.

Two things are worth knowing. First, the annual report is the measured data for 2025, and its plant averages are lower than the web page’s typical figure. Second, the web page’s ppm and gpg numbers don’t quite match: at the standard conversion of 17.1 mg/L per grain, 272 to 284 ppm is 15.9 to 16.6 gpg, not 16 to 18.

Both sources agree on the top end, though. The highest single result in the 2025 report was 285 ppm (16.6 gpg), and the web page’s upper ppm figure is 284. That’s why we suggest a softener setting of about 17 gpg: it covers the hardest water either source describes, with a little to spare.

Where San Diego’s water comes from

San Diego imports most of its water. The bulk is untreated water bought from the San Diego County Water Authority, a blend of Colorado River and State Water Project supplies, which the city then treats at its own plants. Less than 10% arrives already treated, from the Metropolitan Water District’s Skinner plant, the Water Authority’s Twin Oaks Valley plant and the Carlsbad Desalination Plant.

The mix of sources shifts through the year, and the report says so plainly. That’s one reason the plant ranges span 67 to 85 ppm. The Colorado River is also the source behind Las Vegas water hardness, which sits in the same very hard band.

The city expects its Pure Water purification project to start delivering water in early 2027. When it does, check the following year’s report before changing your settings.

San Diego water hardness in other units

Dishwashers, coffee machines and test kits don’t all use grains per gallon. The 2025 plant averages are 237 to 243 ppm (13.8 to 14.2 gpg, 13.3 to 13.6 °dH, 2.37 to 2.43 mmol/L), and the highest 2025 sample is 285 ppm (16.6 gpg, 16.0 °dH, 2.85 mmol/L). These are SofterTap conversions of the city’s figures; the water hardness converter converts a figure from a test strip or appliance manual into every other unit.

What 14 gpg means in a San Diego home

The city publishes one number that explains why San Diego kettles scale so quickly: the Langelier Saturation Index. A positive value means the water tends to deposit calcium carbonate rather than dissolve it. In 2025 the plant averages were 0.7 at Alvarado and Miramar and 0.4 at Otay, all on the scale-forming side. Heat pushes that tendency further, which is why the crust shows up first in kettles, coffee makers and water heaters.

Tankless water heaters deserve a careful look. Noritz’s tankless warranty, for example, excludes damage from water harder than 12 gpg (200 mg/L). Every one of San Diego’s plant averages is above that line. Our guide to tankless water heaters and hard water compares what the main brands require.

Hardness isn’t a health standard. The city’s report lists it under parameters that have no limits and aren’t considered a health risk, alongside sodium. Questions about safety belong with the city’s Water Quality Lab (619-668-3232).

Softener size and salt use in San Diego

Sizing a softener on the highest 2025 result, 16.6 gpg, at 80 gallons per person per day, a family of four removes 37,184 grains a week. That needs a 48,000-grain unit at a medium salt setting and, with an efficiency-rated softener, about 579 lb of salt a year (14.5 bags of 40 lb, $127 at $8.76 a bag). One person uses about 145 lb ($32) and six people about 868 lb ($190).

Use your own household size and water use in the calculator below. It’s already set to San Diego’s 16.6 gpg.

This calculator needs JavaScript. The table above covers 1 to 6 people.

Sodium, chloramine and your softener

San Diego water already contains sodium before it reaches a softener: the 2025 plant averages were 86 to 111 ppm. A salt-based softener adds more, because it swaps hardness for sodium. How much is worked out in potassium chloride vs salt: fully softening 14 gpg water adds around 110 mg/L.

At the plant averages, softened water would carry roughly 200 to 225 mg/L of sodium. If you watch your sodium intake, ask your doctor, and consider an unsoftened kitchen tap or potassium chloride instead of salt.

The city disinfects its pipes with chloramine, averaging 1.75 ppm in 2025. A softener doesn’t remove it, and like any oxidant it slowly wears down softener resin. It’s one reason a softener on city water won’t last forever; our guide to water softener resin replacement explains the signs.

Other San Diego County utilities

Everything above covers customers of the City of San Diego Public Utilities Department. Much of San Diego County is served by separate water districts and cities, each with its own annual report and its own hardness figure. If your bill comes from someone else, look up that utility’s report; our guide to reading a water quality report shows where hardness usually appears.

Frequently asked questions

Is San Diego water hard?

Yes. The 2025 plant averages of 237 to 243 ppm are very hard on the USGS scale, which starts at 181 mg/L.

What should I set my water softener to in San Diego?

About 17 gpg. It covers the highest 2025 sample (16.6 gpg) and the top of the range on the city’s web page. If your softener asks for ppm, use 285.

Is the hardness the same across the city?

Very nearly. The three plant averages differ by only 6 ppm, although individual samples swing by 67 to 85 ppm through the year as the source blend changes.

Do I need a water softener in San Diego?

It’s a choice, not a requirement. At 14 gpg you’ll see scale and spotting without one. Our guide do I need a water softener? walks through the trade-offs, including salt and water use.

Does a water softener remove chloramine?

No. A softener removes hardness. For chloramine you need a filter designed for it, such as a catalytic carbon filter.

Sources

Share this guideWhatsAppFacebookXEmail

Daniel Moreno

Daniel Moreno runs SofterTap. He collects hardness figures from water utilities' annual water quality reports and builds the site's calculators, and every page shows its sources and the math behind its numbers. He is not a licensed plumber or water treatment professional, so for installation work or questions about drinking water safety, check with your utility or a certified pro.

How we research and calculate