Indianapolis Water Hardness: 19 gpg Average, Up to 27 gpg

Indianapolis tap water averaged 317 ppm of hardness, or 19 grains per gallon, in Citizens Energy Group’s 2025 water quality report, with a range of 148 to 460 ppm (8.7 to 27 gpg). That makes it very hard on the USGS scale, and one of the hardest big-city supplies we’ve checked. Because the range is so wide, ask Citizens for your address’s figure before you set a softener; without it, use 27 gpg.

On this page
  1. Why Indianapolis water is so hard
  2. Why your address matters more than usual
  3. Indianapolis water hardness in other units
  4. Do you need a water softener in Indianapolis?
  5. Softener size and salt use in Indianapolis
  6. Salt bags: what a year looks like
  7. Sodium after softening
  8. Frequently asked questions
Citizens Water hardness by system, 2025 report
SystemAverageRangeSodium (average)
Indianapolis & Morgan County317 ppm (19 gpg)148–460 ppm (8.7–27 gpg)44 ppm
Westfield360 ppm (22 gpg)270–470 ppm (16–29 gpg)33 ppm
Westfield – South Madison366 ppm (21 gpg)333–444 ppm (19–26 gpg)10 ppm

Figures as printed in the 2025 report, which gives both ppm and grains per gallon. The report also quotes an overall average of 320 ppm, or 19 gpg.

Why Indianapolis water is so hard

The USGS explains hardness as calcium and magnesium that water dissolves from the soil and rock it passes through. Every Citizens source, river, reservoir and well alike, arrives already carrying plenty of both.

Citizens draws on several of these sources at once. In the Indianapolis and Morgan County system:

  • the White River and White River North plants take water from the West Fork of the White River;
  • Fall Creek feeds the Fall Creek and White River plants;
  • Eagle Creek Reservoir supplies the T.W. Moses plant;
  • wells top up three of those plants from time to time, and six groundwater plants serve smaller areas.

Westfield runs on three groundwater plants plus water bought from Indianapolis, and South Madison on one well-fed plant near Lapel.

Why your address matters more than usual

The Indianapolis range runs from 148 to 460 ppm. The low end is merely hard; the top is more than three times higher. Citizens says hardness can vary with the hardness of the source water used at the plant that supplies you.

That spread changes the softener sums a lot. A family of four at 8.7 gpg needs about 303 lb of salt a year; at 27 gpg the same family needs about 941 lb.

The report gives a phone number for address-specific hardness: 317-924-3311. A test of your own tap is the other option; see how to test water hardness. If you can’t get either, set the softener to 27 gpg: too high wastes some salt, too low lets hard water through.

Indianapolis water hardness in other units

Citizens reports 148 ppm at the low end, 317 ppm on average and 460 ppm at the high end. That is 8.6, 18.5 and 26.9 gpg (Citizens rounds its own values to 8.7, 19 and 27), or 8.3, 17.8 and 25.8 °dH. At 18 to 26 °dH, Indianapolis water sits at or near the top of most dishwasher hardness scales. Keep the dishwasher’s salt compartment filled; our dishwasher hardness setting guide shows which level to choose, and the water hardness converter converts any other figure.

Do you need a water softener in Indianapolis?

At 19 gpg on average, many households do. The Minnesota Department of Health suggests considering a softener above 7 gpg, and the EPA’s WaterSense guide says softeners are often recommended above 10 gpg. Indianapolis water is well over both.

Signs you’ll see without one: a crust in the kettle within days, white film on glassware, soap that won’t lather, and scale building in water heaters. Our do I need a water softener checklist goes through them.

Work out your size. Enter the hardness for your address and the number of people at home, and the calculator shows the size and salt use with every step visible.

Open the softener size calculator

Softener size and salt use in Indianapolis

At the system average, 19 gpg, and 80 gallons per person per day, a family of four removes 42,560 grains a week. That needs a 64,000-grain unit at a medium salt setting and about 662 lb of salt a year ($145 at $8.76 per 40 lb bag); at the top of the range, 27 gpg, the same family uses about 941 lb. One person uses 166 lb at the average and six people 994 lb.

At 27 gpg, a household of five or six would need more than an 80,000-grain unit can deliver in a week at a medium salt setting. Such a home would need a larger system or more frequent regeneration; the calculator below shows the trade-off.

This calculator needs JavaScript. The table above covers 1 to 6 people.

Salt bags: what a year looks like

Hard water means heavy lifting. At the average hardness, a family of four goes through about 16.6 bags of 40 lb a year, roughly one every three weeks. At 27 gpg it’s closer to 23.5 bags.

Two things keep that in check:

  1. an efficient, demand-initiated softener, which only regenerates when the resin is nearly used up;
  2. a correct hardness setting, which the Minnesota Department of Health notes saves both salt and water.

Our guides on how much salt a softener uses and how long a bag lasts go into the details.

Sodium after softening

Citizens reports 44 ppm of sodium on average in the Indianapolis system. Fully softened water at 19 gpg would gain about 150 mg/L, and about 213 mg/L at 27 gpg (the rate is worked out in potassium chloride vs salt).

If that matters to you, keep the kitchen cold tap unsoftened, or switch to potassium chloride. People on a sodium-restricted diet should ask their doctor.

Frequently asked questions

Is Indianapolis water hard?

Very. The 2025 average of 317 ppm, or 19 gpg, is well above the USGS “very hard” threshold of 180 ppm.

What should I set my water softener to in Indianapolis?

The figure Citizens gives for your address. Without it, 27 gpg, the top of the 2025 range for Indianapolis and Morgan County. See our hardness setting guide.

How hard is Westfield water?

Harder still on average: 360 ppm (22 gpg), with a range of 270 to 470 ppm in the 2025 report.

Why does my hardness change through the year?

Citizens blends river, reservoir and well water at several plants, and wells supplement some plants only intermittently, so the mix reaching you can shift.

Sources

Share this guideWhatsAppFacebookXEmail

Daniel Moreno

Daniel Moreno runs SofterTap. He collects hardness figures from water utilities' annual water quality reports and builds the site's calculators, and every page shows its sources and the math behind its numbers. He is not a licensed plumber or water treatment professional, so for installation work or questions about drinking water safety, check with your utility or a certified pro.

How we research and calculate